The test rumble commands weren't 'ready to rumble'.
Code: Select all
*usbjoystick_debug 0
Joystick slot 0 (Sony - PLAYSTATION(R)3 Controller)
Path : devices#interface=0;endpoint=1;nopad;noblock:USB7
File handle : 248
Data stream open : Yes
Local USB device name : USB7
Interface : 0
Endpoint : 1
Device manufacturer : Sony
Device product name : PLAYSTATION(R)3 Controller
Device serial number :
Driver : PlayStation 3 controller
Output transport : Control pipe (HID output report)
Capabilities : Rumble
Report descriptor : From the device
Report id : 1
Report data offset : 0
Data validator : No
Start-up routine : Yes
Auto-inverted axis types: 0
USB vendor id : 0x054c
USB product id : 0x0268
USB device id : 0x0100
Buffer handle : 256
Buffer internal id : 132
Buffer service routine : 0xfc1fca98
Buffer workspace : 0x20004054
DeviceFS handle : 0x20857c74
Report data length : 48
Upcalls : 78479 (delta: 78479)
Good reads : 78479 (delta: 78479)
Bad reads : 0 (delta: 0)
Raw report data : 01 00 00 00 00 00 7f 84 7e 7d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 ee 10 00 00 00 00 06 7f 77 01 81 01 d6 01 f7 01 b3 00
Number of axes : 4
Number of buttons : 19
HAT switch : No
DPAD : No
Axes:
Axis 00 X : Slope 8 = 1 (mul), Slope 16 = 257 (mul), Mouse factor = 1, SP = 97: 159, Invert = off, ReportId = 1
Axis 01 Y : Slope 8 = 1 (mul), Slope 16 = 257 (mul), Mouse factor = 1, SP = 97: 159, Invert = off, ReportId = 1
Axis 02 Z : Slope 8 = 1 (mul), Slope 16 = 257 (mul), Mouse factor = 1, SP = 97: 159, Invert = off, ReportId = 1
Axis 03 RZ : Slope 8 = 1 (mul), Slope 16 = 257 (mul), Mouse factor = 1, SP = 97: 159, Invert = off, ReportId = 1
Button ReportIds : 00=1 01=1 02=1 03=1 04=1 05=1 06=1 07=1 08=1 09=1 10=1 11=1 12=1 13=1 14=1 15=1 16=1 17=1 18=1