I recently installed ADFFS on a Pi with RISC OS 5.24. I see Anymode hasn't been mentioned on the Pi installation instructions since v2.64. However without it when I ran a game (Nevryon) I had 4 identical screens. Installing Anymode seemed to cure that. Is it correct that Anymode isn't required?
Thanks
Anymode on Pi with v2.72 of ADFFS
Re: Anymode on Pi with v2.72 of ADFFS
AnyMode shouldn't be required provided the Pi requirements are met:
I'll double check Nevryon, just to be sure.RISC OS 5.27 Nov 16th 2018 or newer
Re: Anymode on Pi with v2.72 of ADFFS
Nevyron works without AnyMode, tested on the 5.27 26th Feb 2019. I believe I tested ADFFS 2.72 on older OS builds and found issues with video, as ADFFS was heavily modified to match changes to the mode change process in the OS.
The requirement for AnyMode was removed when a full GraphicsV driver was added to ADFFS, so what you're seeing may be a side effect of the changes made for the OS mode change process changes.