Re: Partition Manager feedback
Posted: Sun Jun 25, 2023
FWIW, I went back and tried PM 0.98 on this machine, and it also doesn't recognise the partitions, but doesn't go funny colours like 0.99 does.
forums.jaspp.org.uk
The Archimedes Software Preservation Project
https://forums.jaspp.org.uk:443/forum/
Partition Manager feedback
Page 27 of 36
Re: Partition Manager feedback
Posted: Sun Jun 25, 2023
I've just noticed the blueness in 0.99 only happens when I resize the window. Not sure why I didn't twig that before - just a natural habit of resizing I think.
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Looks like you hit the jackpot, with three bugs:IanJeffray wrote: Sun Jun 25, 2023 I've just noticed the blueness in 0.99 only happens when I resize the window. Not sure why I didn't twig that before - just a natural habit of resizing I think.
- The Window indirect data is possibly getting corrupt, causing the Blue issue
- SCSIFS wasn't detected
- ZIDEFS has failed to read the partition table
Could you let me know which of these fail with the SCSI Podule?
Code: Select all
SYS "OS_SWINumberFromString",,"SCSI_Initialise"
SYS "OS_SWINumberFromString",,"SCSIFS_Drives"Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Both of these issues should be fixed in the latest build.JonAbbott wrote: Mon Jun 26, 2023
- The Window indirect data is possibly getting corrupt, causing the Blue issue
- ZIDEFS has failed to read the partition table
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Looks like it - working fine with that ZIDEFS podule/DOM now and no blue.JonAbbott wrote: Mon Jun 26, 2023Both of these issues should be fixed in the latest build.JonAbbott wrote: Mon Jun 26, 2023
- The Window indirect data is possibly getting corrupt, causing the Blue issue
- ZIDEFS has failed to read the partition table
Neither fail. Adding PRINTs, they return &403C1 and &40982 respectively.JonAbbott wrote: Mon Jun 26, 2023 Could you let me know which of these fail with the SCSI Podule?Code: Select all
SYS "OS_SWINumberFromString",,"SCSI_Initialise" SYS "OS_SWINumberFromString",,"SCSIFS_Drives"
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Well that's bizarre as they're the only two checks for it to add "SCSIFS found" to the debug output - which is clearly missing in the debug log you posted.IanJeffray wrote: Mon Jun 26, 2023Neither fail. Adding PRINTs, they return &403C1 and &40982 respectively.JonAbbott wrote: Mon Jun 26, 2023 Could you let me know which of these fail with the SCSI Podule?Code: Select all
SYS "OS_SWINumberFromString",,"SCSI_Initialise" SYS "OS_SWINumberFromString",,"SCSIFS_Drives"
Is there a SCSIFS Module?
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Yes, SCSI, SCSIFiler, and SCSIFS.
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Some kinda proof of what I've checked. Maybe function's not been called at all. Need to hack.
- oak.png (8.04 KiB) Viewed 21082 times
Re: Partition Manager feedback
Posted: Mon Jun 26, 2023
Yeah, it seems FNinitialise_SCSIFS is never called.
Re: Partition Manager feedback
Posted: Tue Jun 27, 2023
Are you using the Oak SCSI card under Arculator? Or a physical card?