Page 2 of 4
Re: Provocator spotted:
Posted: Sat Feb 06, 2021
by wmd
Game arrived today, will be testing it out later.
My old disk was a copy, not an original. I don't know if it had been hacked, or (more likely) had been copied from an original using an Amiga hardware copier. I never had a HDD back in the 90s when I had my first Archimedes, so I was running everything from floppies. There was definitely no passwords required from the manual.
Re: Provocator spotted:
Posted: Sat Feb 06, 2021
by Starlord
Great. Enjoy your purchase.
Re: Provocator spotted:
Posted: Sun Feb 07, 2021
by wmd
I tested my A3020 today and there seems to be an issue. I am getting the following error when I turn the machine on:
"Warning: CMOS RAM for Ether3 in socket 1 defaulted"
This machine has a network podule card fitted in it, which is what is presumably the "socket 1" in the error above? I tried turning on with Delete held down to reset the CMOS, but same error. The display is also rolling, like it isn't synced or something. It doesn't seem to be accepting keyboard inputs either. I've used the A3020 on this TV before (via RGB scart) and don't remember this problem occurring then.
Re: Provocator spotted:
Posted: Sun Feb 07, 2021
by wmd
Bit of progress - opened it up to make sure there was no battery leakage - there wasn't, previous owner had done a small mod so that the battery is located away from the main board. I removed the battery anyway, and also removed the LAN podule. The machine now boots into desktop, but I'm still getting the screen rolling.
Re: Provocator spotted:
Posted: Sun Feb 07, 2021
by wmd
Have managed to load the game from the desktop. Loads fine, although unplayable due to the screen rolling.
Re: Provocator spotted:
Posted: Sun Feb 07, 2021
by JonAbbott
Have you *configured MonitorType and Sync?
Re: Provocator spotted:
Posted: Sun Feb 07, 2021
by wmd
No, how do I do that? I don't recall having to do that in the past.
Re: Provocator spotted:
Posted: Mon Feb 08, 2021
by wmd
I did a bit of searching, and tried:
*CONFIGURE MONITORTYPE 0
*CONFIGURE SYNC 1
Then did CTRL + BREAK, but no change.
Re: Provocator spotted:
Posted: Tue Feb 09, 2021
by JonAbbott
You probably want to use MonitorType 4 and use a VGA monitor.
Re: Provocator spotted:
Posted: Wed Feb 10, 2021
by giggler
Hi.
I have Provocator. I think I may have sold that copy to the French guy you bought it off, he bought a load of NOS games from me. It is protected, I have unprotected my hdd copy. It was pretty basic and I think your ADF reader will work. I have an ADF if you want it?
I got 3 copies in ~2006 when I was getting rid of my old Acorn mags. I noticed an advert for it in one of the old mags, dial code had changed so i call up the same number with new dial code and the guy who wrote the game answered. I talked about it for a bit, then asked if he had any copies i could buy. He sold me 3 for £10each. They arrived smelling very smokey but over time the smell has gone.