pi-topUtils 1.07

Keyboard/HID driver and battery indicator for pi-top laptops
Post Reply
JonAbbott
Posts: 3033
Joined: Thu Apr 11, 2013 12:13 pm
Location: Essex
Contact:

pi-topUtils 1.07

Post by JonAbbott »

This build includes the following changes to resolve hangs under recent RISC OS 5.27 beta builds:
  • The HID and Keyboard drivers now use BufferManager to read USB data
  • Screen dimmer now runs under RTSupport so it can yield when SPI data is delayed
  • Added additional pause loops to reduce the likelihood of the pi-top hub getting into an indeterminate state
- - - - -

pi-top Utilities provides a battery level indicator, screen dimming, auto shutdown, pi-top speaker control and pi-top keyboard support.

The battery icon indicates the percentage of charge and powered status:
Image


Hover the mouse over the icon for time information:
Image


It also includes HID and USB keyboard drivers, which add the following features:
  • Volume controls adjust pi-top speakers, or the RISC OS volume if none are available
  • Brightness controls work
  • left pi-top+SHIFT+| is |
  • left pi-top+Left Arrow is Home
  • left pi-top+Right Arrow is End/Copy
  • left pi-top+Up Arrow is Page Up
  • left pi-top+Down Arrow is Page Down
  • left pi-top+DEL is Pause/Break
  • right pi-top is the middle mouse button
  • P-key / F-key behaviour is swapped by default, removing the requirement to hold Fn for the function keys (set in !Run)
  • Dims the screen when there's no keyboard/mouse activity (timeout is set in !Run)
  • Powers down the screen when the DPMS screen saver blanks the screen
  • Powers down if left on the Wimp shutdown screen (4 sec by default, timeout can be set or disabled in !Run), pressing a key or the Restart button cancels the power down
  • Can set the brightness to a default level when loaded (set in !Run)
By default the P-keys and F-keys are swapped, the behaviour can be toggled by pressing the key next to DEL (this may be removed once finalized).

pi-topUtils107.zip
(12.44 KiB) Downloaded 1222 times
source107.zip
(11.45 KiB) Downloaded 1086 times

Configuring a pi-top for gaming

If you're going to be using your pi-top for gaming, you'll also want to create a custom 50hz video mode so games such as Pac-mania have silky smooth scrolling.

Edit !Boot.Loader.CONFIG/TXT and add the following, remembering to comment out any previous video mode settings:

Code: Select all

# Custom 1360x768 50Hz
hdmi_cvt=1360 768 50 3 0 0 0
hdmi_group=2
hdmi_mode=87
bigpopsjohn
Posts: 2
Joined: Mon Dec 19, 2022 10:10 pm

Re: pi-topUtils 1.07

Post by bigpopsjohn »

im pretty much a noob to risc, being a commodore kid, bit i had some basic usage at school but thats was 30 years ago. so as an old dog trying to learn new tricks, could you explain exactly what i do with the pi-top utilities plipfile (?). also, do i need the pispk programme to get the pi-top v1 speakers to work?
JonAbbott
Posts: 3033
Joined: Thu Apr 11, 2013 12:13 pm
Location: Essex
Contact:

Re: pi-topUtils 1.07

Post by JonAbbott »

Either manually run it by double-clicking, or add it to the boot sequence by right clicking on the Raspberry logo, selecting Configure, then open Boot and drag-drag it into the Run tasks section.
bigpopsjohn
Posts: 2
Joined: Mon Dec 19, 2022 10:10 pm

Re: pi-topUtils 1.07

Post by bigpopsjohn »

so i can put the util file anywhere within the filing system?
JonAbbott
Posts: 3033
Joined: Thu Apr 11, 2013 12:13 pm
Location: Essex
Contact:

Re: pi-topUtils 1.07

Post by JonAbbott »

You can put it anywhere
Post Reply