Powerband sound

Discuss the project, or ask a general question
Post Reply
giggler
Posts: 31
Joined: Tue Feb 09, 2021 2:47 pm

Powerband sound

Post by giggler »

Powerband, imaged using 2.7.3 on an A4K with 4MB. This is mark2 with extra features version. It fails to run, loading screen ends at line 430 which is OSCLI "*CH. xxxx", setting up audio. I assume worked under RiscOs 2? no *CHANNEL now? removing gets further then it stops in menu screen, again another "*CH." which seems to be an unknown command in RiscOS 3.11. If you remove that basic line 143xxx and set to AL%=TRUE or something like at the end of line, then type "RUN" it all works albeit with the wrong audio on button clicks etc. Is there any fix for this?
JonAbbott
Posts: 2938
Joined: Thu Apr 11, 2013 12:13 pm
Location: Essex
Contact:

Re: Powerband sound

Post by JonAbbott »

giggler wrote: Thu Feb 11, 2021 4:16 pm It fails to run, loading screen ends at line 430 which is OSCLI "*CH. xxxx", setting up audio.
That particular issue is fixed, provided you use Boot Floppy from the ADFFS Filer menu.
Post Reply