forums.jaspp.org.uk

More bad news from me I'm afraid. I tried the latest PM 0.99 with a Cumana SCSI card. The machine locks up hard solid as soon as SCSIFS scanning begins. Nothing useful in the debug.txt: PartMgr v0.99 28/06/23 DEBUG OS Version=310 FileCore Version=241 FileSwitch Version=208 ADFS found IDEFS found, de...

Attached is the EPROM (without CD support) with the patches I've implemented, should you want to try it. This doesn't work on real hardware for me - the podule doesn't even show up in *podules with this image in its ROM. Possibly due to the hardware I have being "Iss 2" and using a 27C512...

From my reverse-engineer of Watford IDE, it didn't appear to be anything other than a plain IDE card - unless I have an old version of IDEFS (v2.10). It does have an IDEFS_NovRAM SWI, but without any of the original software (or a card to test) its not clear what it's for or does. Oh it definitely ...

Do you know if the EEPROM also includes the Modules? Or are they in a separate ROM? The config EEPROM is a small 1K 93C06N I2C EEPROM. The podule modules are stored in a standard 8bit parallel 64KB 27C512 EPROM. I sometimes wonder what goes through the developer's head when they have these fantasti...

JonAbbott wrote: ↑Wed Jun 28, 2023 10:46 pm Before I start adding code, what am I missing?

I just use SCSIForm to set up the card, sorry. As you'll probably have seen, all its configuration is stored in its own eeprom, not CMOS RAM.

Sadly I still get the subscript error at 266 Please try the build I've just made available No errors now, but ZIDEFS drives have now gone completely missing from the display. The Oak drives each still appears four times, too. ZIDEFS debug looks kinda messed up... "Potentially 1 drives" .....

iX partitions don't show up This now gives "Subscript out of range in FS.SCSIFS at line 266" Hopefully both are fixed in the build I've just made available . Sadly I still get the subscript error at 266 And I doublechecked it's the 28th June version of version 0.99 I'm running. Hacking Ma...

FWIW, the same BlueSCSI setup in an AKA31 works just fine (but doesn't show up iX sections - not sure it should?) Ditto on a Morley 16bit cached card with AlSystems ROM - all looks good. Not sure why iX would be any different on the AKA31 as its exactly the same code for all SCSI devices. No, I was...

FWIW, the same BlueSCSI setup in an AKA31 works just fine (but doesn't show up iX sections - not sure it should?)

Ditto on a Morley 16bit cached card with AlSystems ROM - all looks good.

*devices Device Type Capacity Vendor Product Revision 0 Direct-access 258 MBytes BlueSCSI HARDDRIVE 2.0 1 Direct-access 116 MBytes BlueSCSI HARDDRIVE 2.0 2 Direct-access 100 MBytes BlueSCSI HARDDRIVE 2.0 3 Direct-access 100 MBytes BlueSCSI HARDDRIVE 2.0 4 Read-only 572 MBytes BlueSCSI CDROM 2.0 5 R...