Partition Manager allows drives to be initialised, partitioned and formatted.

Hold ALT when launching to run in DEBUG mode.  This outputs a debug log to
debug/txt within it's applicaton folder.  Ideally copy the app to RAM: before
using debug mode to avoid writing to a filesystem being modified.

Hold CTRL when launching to perform a low-level disc scan.  This ignores the
configured drive counts and attempts to identify all available discs.
CTRL can be used after installing a new drive and it will prompt to configure the Filesystem drive/partition counts.  Alternatively select "Refresh drives"
from the menu once loaded.  Not all filesystems support low-level scans.

Physical drives are shown in the top section, with the drive on the left and
partition information on the right.  Volume information is shown in the bottom
section.

Press Menu over a drive to see options that affect a whole drive.  Press Menu
over a partition or unallocated space will present partition options.

Pressing menu anywhere will also offer "Refresh drives", which will perform
a low-level scan for additional drives not shown.

Raspberry Pi and Pinebook Pro Bootdrives can be initialised via the relevant
drive menu option.


Partition schemes supported
===========================
 MBR
 GPT
 Full-disc FileCore
 ZIDEFS
 HCCS (HCCS, Simtec)
 ICS (Baildon, ICS, APDL)
 ATAFS (Yellowstone)

The following Filesystems are supported:
 ADFS (full-disc FileCore only)
 ATAFS (ATAFS partitioning only)
 CDFS
 HDFFS (MBR, GPT and full-disc FileCore)
 IDEFS (support varies depending on the Podule)
 MassFS (work in progress)
 NVMeFS (MBR, GPT and full-disc FileCore)
 SCSIFS (MBR, GPT and full-disc FileCore)
   Castle SCSI    - partitioning not supported
   Oak SCSI       - partitioning not supported.  Duplicate drives might be
                    shown due to a bug in its SCSI implementation
   Power-Tec SCSI - partitioning not supported
 SDFS (MBR, GPT and full-disc FileCore)
 Wizzo (up to 4 FileCore partitions)
 ZIDEFS (full-disc FileCore and ZIDEFS partitioning)


Formats supported
=================
 FileCore
 FAT (FAT16 and FAT32)


IDEFS versions supported
========================
 A9home
 APDL
 Beebug (Risc Developments clone)
 HCCS
 ICS
 Risc Developments
 Simtec
 STD Unipod
 Watford IDE

 Untested/possibly unsupported IDEFS Podules:
 Alsystem PowerTec IDE


Contact: jon@jaspp.org.uk